15.2 A/V Pre-Amplifier/Processor with Dolby Atmos & DTS:X
ready, and Anthem Room Correction (ARC).
|
SPECIFICATIONS
| Preamplifier (Measured at XLR Output) |
Maximum Output (<0.1% THD) 10.7 VRMS, Subwoofer 11 VRMS
Frequency Response 20 Hz — 35 kHz (+/-0.2dB)
Frequency Response, Analog-Direct 20 Hz — 80 kHz (+0, -2 dB)
THD+N (4 Vrms output) -100 dB
S/N Ratio (4 Vrms output, IEC-A filter) 110 dB
XLR Configuration Pin 1: Ground, Pin 2: Positive, Pin 3: Negative
|
|
Power Consumption
|
Typical Load 60 W
Standby 0.3 W
Standby IP Control Enabled 1.8 W
Standby HDMI Bypass Enabled 4.9 W
|
| Dimensions |
Height (without feet) 6" (15.24 cm)
Height with Rackmount Kit 4U
Width 17" (43.18 cm)
Depth (including wifi ant not power cord) 14-1/2" (36.4 cm)
Weight 22.1 lbs, 10.1 Kg
|
|
Power Requirement
|
120 V version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.
|
|
