Halogen Dimmer

The new innovative matte black dimmer encompasses an on/off switch and an ergonomic dimming lever in the one compact unit measuring only 7cm x 5cm x 3.5cm. The housing of the Halogen Dimmer also has “notches” to allow for the dimmer to be mounted on a flat surface using screws.

KIT INCLUSIONS:
1 x Halogen Dimmer
1 x Velcro Strap

PRODUCT DETAILS
Installation:
Please note: This Halogen Dimmer is for use with Halogen lights only.

Step 1: Locate the input wires on your Halogen Dimmer; these wires can be identified by the “Input” label on the back of the housing.

Step 2: Identify the positive and negative cables for the input . These can be identified by the “- +” labelling on the back of the housing.

Step 3: Connect the input wires of your Halogen Dimmer Unit to a fused 12v power source. This connection can be made using a connector rated to a minimum of 12 amps (not supplied) or by soldering the joins. (Ensure positive and negative are connected correctly. Refer to Step 2).

Step 4: Locate the output wires to your Halogen Dimmer; these can be identified by the “Output” labelling on the back of the housing.

Step 5: Identify the positive and negative wires for the output, these can be identified by the “-+” labelling on the back of the housing.

Step 6: Connect the output wires of your Halogen Dimmer to a halogen light with a current draw not exceeding the maximum rating of 12 amps. This connection can be made using a connector rated to a minimum of 12 amps (not supplied) or by soldering the joins. (Ensure positive and negative are connected correctly. Refer to Step 5).

Operation:
The Halogen Dimmer is capable of both switching ON/OFF and dimming your halogen light from zero to 100% output.

The button on the front of the housing is for toggling between on and off.

The lever located on the housing can be used to dim your halogen light from 100% to zero.

Please ensure that the ON/OFF button is in the OFF position when the light is not being used for an extended period of time. This will prevent your battery from going flat.



Mounting:
A hook and loop strap is supplied with the Halogen Dimmer, this allows the Halogen Dimmer unit to be mounted in various locations such as on a rifle stock.

The housing of the Halogen Dimmer has “notches” to allow for the Dimmer to be mounted on a flat surface using screws (not supplied).

Specifications:

Input voltage range: 10 – 16 V
Maximum output current: 12A
Reverse polarity protection.


Features:

• Pulse width modulation for increased efficiency
• Strain relief on the cable connections, taking pressure off the cable joins to the dimmer unit
• Recessed button for reduced risk of unwanted on/off switching
• Screw mounting points for permanent mounting to most surfaces
• Hook and loop strap provided for stock mounting
• Ergonomically designed dimming adjustment ranging from 0-100%.