The Control4® DIN-Rail 8-Channel 0-10V Dimmer controls up to eight (8) 0-10V dimmable fluorescent ballasts or LEDs. Each channel can control up to 50 ballasts. Individual 0-10V lights can be programmatically tied to a corresponding channel on a Control4® DIN-Rail 8-Channel Relay module for on/off control of the ballast or LED when needed. Alternatively, the Control4 8-Channel 0-10V Dimmer module also has eight (8) low-voltage outputs for triggering external power relays.
Features
- Controls up to eight 0-10V dimmable fluorescent ballasts or LEDs
- Sink up to 100mA per channel for control of up to 50 ballasts or source up to 25mA per channel for control of up to 12 ballasts
- Eight low-voltage outputs for triggering external power relays
- Channel buttons allow for toggling on/off or ramping up/down a load
- Channel status LEDs indicate whether a load is on or off
- Module override button allows toggling between the module override scene and all channels off or setting the module override scene to current channel levels
- Module status LED indicates if module power is on with normal operation or off
- Auxiliary override connection allows a standard line-voltage toggle switch to control the attached lights before the control system is installed or in case the controller malfunctions
- Module can be installed in either a Control4 5-Slot or 2-Slot Panel or in a third-party DIN-Rail Panel
