Signature SUB 2

Hexagonal cabinet with multiple high-excursion drivers radially aligned in a Vibration-Canceling Design Architecture, patented built-in Ultra-Class-D™ power amplifier with Power Factor Correction, sealed enclosure, PBK interface. NOTE: Due to the incredibly high power and tremendous output the SUB 2’s grilles are non-removable.

Auto-On / Off, Trigger On / Off, soft clipping, electrical shorting protection, thermal protection SUB 2’s Universal Input Power feature allows the subwoofer to operate connected to any line voltage between 108 volts and 265 volts. In order to achieve maximum output, connect to a 240-volt line. (See Dealer for additional information.)

FREQUENCY RESPONSE ON-AXIS

±3 dB 9Hz – 260Hz

ROOM CORRECTION

Anthem Room Correction (ARC®) (included PBK kits works with ARC Genesis software)

LOW FREQUENCY EXTENSION

7 Hz (DIN)

LOW FREQUENCY DRIVER

Six 254-mm (10 in) RCR™ mineral-filled co-polymer polypropylene cones, FEA-optimized overmolded thermoplastic foam-surrounds, 76-mm (3 in) ten-layer long-excursion voice coils, high-temperature composite Nomex® formers, dual advanced spiders, 25.2-lb (10.5 kg) hard ferrite magnet / motor structure, massive center heatsink and oversize pole piece, AVS™ die-cast heatsink chassis

SENSITIVITY ROOM / ANECHOIC

100 mV mono /

IMPEDANCE

RCA: 10k ohms; XLR: 20k ohms

WEIGHT

230 lbs. (106 kg)

FINISHES

Cherry, Piano Black, Black Ash

LOW PASS FILTER FREQUENCY

Variable 35 Hz - 150 Hz; Bypass Option

SUB / SAT PHASE ALIGNMENT

Variable 0° - 180°

RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of preamp, processor or other line-level source

DIMENSIONS HXWXD (INCLUDES GRILLES AND FEET)

24.5" × 23.75" × 22.375" (62.2cm × 60.3cm × 56.8cm)

AMPLIFIER CONNECTED TO A 240-VOLT OUTLET

9,000 watts Dynamic Peak / 4,500 watts RMS

SPIKE/INSERT THREAD (THREAD SIZE/THREADS PER INCH)

0.3125"-18